TS-Drills with internal cooling

web thinning ≥ Ø 3.000 • 180° point geometry for flat bottom of the hole • for piloting, drilling, finishing • low burr development • piloting in all positions and materials
  • Connection code machine side: ~DIN 6535-HA
    Connection code machine side: ~DIN 6535-HA
    Connection code machine side: ~DIN 6535-HA
  • Cutting depth: ~3xD
    Cutting depth: ~3xD
    Cutting depth: ~3xD
  • Ø-Thinning: 3.000
    Ø-Thinning: 3.000
    Ø-Thinning: 3.000
  • Tolerance on Ø: n7
    Tolerance on Ø: n7
    Tolerance on Ø: n7
  • Internal cooling: with
    Internal cooling: with
    Internal cooling: with
  • Standard: Company std.
    Standard: Company std.
    Standard: Company std.
  • Surface: nanoFIRE
    Surface: nanoFIRE
    Surface: nanoFIRE
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: TS 180 U
    Type: TS 180 U
    Type: TS 180 U
  • Point angle: 180
    Point angle: 180
    Point angle: 180
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
SKU
89519
Recommended use
Spot drilling on flat surfaces:
1. Spot drill with a conventional solid carbide drill, e.g. art. 2477 on Ø FB of the following RT 100 FB
or on Ø FB + 0.20 mm to apply a chamfer directly. 2. Insert the RT 100 FB at the full feed rate.
Spot drilling or exiting on inclined surfaces:
Up to 15° = reduce feed by 25 %, up to 30° = reduce feed by 50 %, and up to max. 45° = reduce feed by 75 %. When fully wrapped, the feed rate can be raised to 100 %
Available in many variants
    Loading...